Spin Flash Dryer is a new type of continuous drying equipment that integrates drying, crushing, and sieving. It is especially suitable for drying cake-shaped, paste-like, and thin mud-like materials. The drying time of the wet material in the drying tower is only 5-8 seconds, and the moisture evaporates instantly.

The circumferential air velocity in the drying chamber is high, and the material residence time is short, which effectively prevents the sticky walls of the materials and the heat-sensitive materials from deteriorating, and can be dried into a uniform powdery product at one time, eliminating the need for crushing and screening. The drying chamber is equipped with a classification ring and a swirling blade, and the fineness and final moisture of the material can be adjusted. The special air distribution device reduces the resistance of the equipment and effectively improves the drying uniformity of the material. The bottom of the dryer is equipped with a special cooling device and a pneumatic seal to avoid the deterioration of the material in the high-temperature area of ​​the bottom. It can effectively control the final moisture and fineness. Through the adjustment of the feeding, hot air temperature, and classifier, it can ensure that the moisture content and fineness of the product are uniform.

The Flash Dryer is suitable for boric acid, calcium carbonate, hydroxide, copper sulfate, iron oxide, barium carbonate, antimony trioxide, various metal hydroxides, various heavy metal salts, synthetic cryolite, etc., and by adjusting the feed, hot air temperature and classifier to ensure that the moisture content and fineness of the product are uniforms. For more information, please consult online.