dingli@dlbio-dryer.com
+86 15333718778(Wechat/WhatsApp)
【Application】:It is suitable for the fermentation treatment of organic waste such as pig manure, chicken manure, cow manure, sheep manure, mushroom residue, traditional Chinese medicine residue, and crop straw.
This fermentation equipment can be used to process organic waste such as pig manure, chicken manure, cow manure, sheep manure, mushroom residue, traditional Chinese medicine residue, crop straw, etc. It can complete the harmless treatment process in 10 hours and takes up little space (fermentation machine It only covers an area of 10-30 square meters), is pollution-free (closed fermentation), and completely kills disease and insect eggs (can be adjusted to a high temperature of 80-110°C). It is an ideal solution for the majority of breeding enterprises, circular agriculture, and ecological agriculture to realize waste resource utilization. Ideal for use. In addition, fermentation tanks with different capacities of 5-150 m3 and different forms (horizontal and vertical) can be customized according to customer needs. During the fermentation process, aeration, temperature control, stirring, and deodorization are automatically controlled. When discharging, start the pneumatic discharging device to quickly discharge the material. The whole process is automatically controlled, no workers are needed.
Fermentation tank refers to an industrial device used for microbial enzyme production. Its main body is generally a main round cylinder made of stainless steel plates, with a volume ranging from 1 cubic meter to hundreds of cubic meters. In the design and processing, attention should be paid to a tight and reasonable structure. It is equipped with steam sterilization, has certain operating flexibility, minimizes internal accessories (avoiding dead ends), has strong material and energy transfer performance, and can be adjusted to facilitate cleaning and reduce pollution. It is suitable for the production of a variety of products and reduces energy consumption.
| Model | Heater power（kw） | Mixing power（kw） | Reducer model | Mixing speed（r/min) | Dimensions（mm） |
|---|---|---|---|---|---|
| SXFJG-5 | 4*6 | 7.5 | BLED74-289-7.5 | 3 | 2200*2200*5300 |
| SXFJG-10 | 4*6 | 11 | BLED85-439-11 | 3 | 2400*2400*6900 |
| SXFJG-20 | 8*6 | 18.5 | BLED95-391-18.5 | 3 | 3700*3700*8500 |
| SXFJG-90 | 46 | 26.5 | XWD4-29-3-4 | 8-10 | 5000*5000*10000 |
Performance characteristics
1) Calibrate the pH electrode and dissolved oxygen electrode.
2) Tank sterilization. Add the culture medium into the tank as needed and seal it as required. For small fermentation tanks (5L), the tank can be put into a large sterilization pot for sterilization (115C, 30 minutes); for large fermentation tanks (10L and above) Steam sterilization (121C, 30min).
3) After the tank has cooled down, place it on the fermentation platform and install it intact; turn on the cooling water, turn on the power of the air pump, connect the ventilation pipe to start ventilation, adjust the air inlet knob to ensure appropriate ventilation, and keep the tank pressure at 0.05MPa; Set the temperature, pH, stirring speed, etc., and perform slope calibration of the dissolved oxygen electrode under the determined rotation speed and ventilation volume, the value is 99 99%
4) After the temperature is stable and all parameters are correct, insert the pre-shaken seeds, start fermentation timing, and start recording various parameters.
6)After fermentation, clean the tank and electrode, insert the pH electrode into an Erlenmeyer flask with 3M potassium chloride for later use, and cover the probe of the dissolved oxygen electrode with a protective cover and save it for later use.
