1. Keep the workplace clean. After each pig manure organic fertilizer equipment test, the residual mortar inside and outside the granulation leaves and granulation pot should be removed, and the mortar and flying objects scattered or splashed on the pig manure organic fertilizer equipment should be cleaned. The processing surface of the pig manure organic fertilizer granulator exposed to the outside should be wiped clean, coated with anti-rust meat paint, and covered with corresponding protective covers to prevent dust from entering again.

2. The pig manure organic fertilizer granulator has no external refueling hole, and the gears and worm gears are lubricated with organic fertilizer equipment butter. The upper and lower gears should be filled with three-pack grease once every season. When refueling, the gearbox cover and transmission gear cover of the dynamic group can be opened separately. The sliding surface of the support gearbox and the bracket hinge should be dripped with engine oil for lubrication. The worm gear box and bearings are fully filled with transmission grease when leaving the factory, but the gearbox machine should be thoroughly cleaned once every year after use, and all protective lubricants should be replaced.

3. Always pay attention to the operation of the pig manure organic fertilizer granulator. There should be no serious abnormal noise, let alone metal friction sound. If any abnormality is found, it should be stopped immediately and checked. It can only be used after the fault is eliminated. If the corresponding cause cannot be found, the machine cannot be started. If there is a metal friction sound, you can first check the gap between the organic fertilizer equipment.

4. Check the standard gap between the pig manure organic fertilizer granulators frequently.

5. When repairing the pig manure organic fertilizer granulator, the working gap should be re-measured each time and adjusted several times. It can be continued to be used only after it meets the standard.

6. If the pig manure organic fertilizer granulator cannot operate when the program controller is pressed, check whether the power supply voltage, power plug socket, connection plug socket, etc. are normal, and check the internal fault of the controller.