The Spin Flash Dryer is a new type of continuous drying equipment that integrates drying, crushing, and sieving. It is especially suitable for the drying of cake-like, paste-like, and slurry-like materials. The drying time of wet materials in the drying tower is only 5-8 seconds, the moisture evaporates instantly, and the quality of the dried product has a great relationship with the drying temperature, wind speed, air volume, and the speed of crushing.The flash dryer is composed of heater, feeder, stirring and crushing system, classifier, drying main pipe, cyclone separator, bag filter, fan, etc.

The flash dryer is tangent to the hot air to enter the bottom of the dryer, driven by the agitator to form a powerful rotating wind field. The material is fed into the dryer quantitatively by the screw feeder and is fully heat-exchanged with the hot air. Under the strong action of the high-speed rotating stirring paddle, the larger and humid material is dispersed by the impact, friction and shear force The bulk material is quickly crushed, and the material with lower moisture content and smaller particle size rise together with the rotating airflow, and it is fully contacted with the hot air, heated and dried, and sent to the separator for gas-solid separation. The dried finished materials are collected and packaged, and the exhaust gas is processed by the dust removal device. The exhaust gas that meets the environmental protection requirements and the dust content ≤50mg/m3 is evacuated by the induced draft fan to complete the entire drying process.

The Industrial Flash Dryer is suitable for boric acid, calcium carbonate, hydroxide, copper sulfate, iron oxide, barium carbonate, antimony trioxide, various metal hydroxides, various heavy metal salts, synthetic cryolite, etc., and by adjusting the feed, hot air temperature and classifier to ensure that the moisture content and fineness of the product are uniforms. For more information, please consult online.