How can a large amount of slime reduce moisture quickly? Some customers want to use drying methods to save costs, but a large amount of slime drying requires a certain amount of space and labor costs, so it is recommended that a large amount of slime be dried by mechanical equipment, so that the slime can be quickly dried.

    How to dry a large amount of slime quickly? Enterprises can use a large number of slime dryer equipment. Zhengzhou Dingli has currently launched a slime drying equipment with a daily processing capacity of 300-3000 tons. More production capacity supports customization. The equipment uses high-temperature hot air drying, which can quickly reduce the moisture of the slime to customers. According to the needs, Dingli slime dryer can be equipped with multiple heat sources and multi-stage dust removal according to environmental protection requirements. It can be selected by customers in different regions. Dingli slime dryer is mainly composed of heat source, feeding device and belt feeding Machine, rotary drum, belt discharge machine, induced draft fan, dust collector and power distribution cabinet. The working principle of the equipment is as follows: due to the certain viscosity of the material, the wet material enters the drying drum and is divided into the following working areas: First, the material guide area, the wet material mud enters this area and contacts with high temperature hot air to quickly evaporate water, and the material is in a large When the guide material of the guide angle is copied, it will be guided to the next working area without forming a bond; the second is to pick up the cleaning area, where the wet material is picked up by the copy board to form the material curtain state, and the material is easy to form sticky when falling The phenomenon of caking drum wall, in this area, because the equipment is designed with a cleaning device, the cleaning device cleans the material adhering to the inner wall very reasonably. In this process, the cleaning device also breaks the agglomeration of the material ball, which increases The heat exchange area improves the drying rate; the third is the inclined lifting plate area, where the wet slime is already in a loose state with low moisture content, and the material no longer has adhesion in this area. After sufficient heat exchange, the material meets the requirements The water state of the water enters the discharge area; the fourth is the discharge area, the roller is not provided with a copy board in this area, and the material rolls and slides to the discharge port in this area to complete the entire drying process.

    A large amount of slime can be quickly dried by Dingli slime dryer. Zhengzhou Dingli slime dryer is directly supplied by the manufacturer. Welcome to leave a message for consultation.