1、The semi-wet material crusher adopts a two-stage rotor, no screen bottom and two-way adjustment gap technology. This situation has many advantages. The upper and lower stages of crushing, the material is crushed into fine particles by the upper rotor crusher, and then transported to the lower rotor, and continued to be crushed into fine powder, and discharged through the discharge port. The semi-wet material crusher has no screen bottom, the material is widely applicable and will not be blocked.

2、 The semi-wet material crusher has a high-alloy wear-resistant hammer head, and the hammer is made of forging, which is particularly strong and wear-resistant. It is stronger and more wear-resistant than ordinary hammers, which increases the service life of the hammer.

3、The two-way adjustment gap technology can achieve that if the hammer is worn, it can continue to be used without repairing the hammer head and only moving the hammer position. On the other hand, by adjusting the gap between the hammer head and the liner, the material particle size can be adjusted and controlled.