1. The feeding port of the organic fertilizer crusher does not discharge smoothly, the oblique port is not conducive to feeding, and the straight port increases the center of gravity of the feed, making the material feed faster.

2. Design problem. Don't look at the appearance of some manufacturers' organic fertilizer crushers. The internal design will be somewhat unreasonable. If the rotor disk is too large, the size of the crushing chamber will be reduced. In addition, if the rotor disk is too large, more material will be wrapped during circular motion, so there will be a problem of not discharging the material. Therefore, in this regard, it is recommended to use equipment from regular large manufacturers.

3. When encountering wet material problems, especially sticky materials, the crushing time is too long, and the wet material will stick to the hammer head, rotor disk, and liner, thereby reducing the crushing chamber, not only reducing the output, but also causing the problem of not discharging the material.

4. The size of the discharge port. There are many types of organic fertilizer crushers with different outputs and models, so the discharge port designs are also different, which are all proportional. In addition, Henan Chengxiang Organic Fertilizer Equipment Manufacturer R&D and Promotion Center has a more humane design, which is to add a plug plate at the discharge port, which can not only control the output size, but also adjust the fineness.