The organic fertilizer dryer can directly dry poultry and livestock manure with a water content of up to 70%-80% to a safe storage moisture of 13% at one time. The whole process is carried out in a closed system, thereby reducing the pollution to the environment during the drying process.

The equipment is mainly composed of a heat source, a feeder, a feeder, a rotary drum, a discharging machine, a material crushing device, an induced draft fan, a discharger and a distribution cabinet; after the dehydrated wet material is added to the dryer, the material is evenly dispersed in the dryer and fully contacted with the hot air under the flipping of the evenly distributed scraper in the drum, which accelerates the heat transfer and mass transfer of drying. During the drying process, the material is discharged to the star-shaped discharge valve of another section of the dryer under the action of the inclined scraper and the hot gas.

The organic fertilizer dryer is a new generation of organic fertilizer dryer developed by our company's staff with many years of fertilizer production experience. The machine has the characteristics of beautiful appearance, simple operation, low energy consumption, long life, uniform drying, and convenient maintenance. It is a fertilizer drying equipment, and the product is sold all over the country.

The working principle of the organic fertilizer dryer is: the main motor drives the belt and pulley, which is transmitted to the driving shaft through the reducer, and the split gears installed on the driving shaft mesh with the large gear ring fixed on the machine body, and work in opposite directions. The material is added from the feed end and passes through the inside of the cylinder. The hot air generated by the hot air furnace (used in conjunction with this machine) enters the inside of the cylinder under the attraction of the fan. The lifting plate installed on the inside of the cylinder continuously turns up the material, so as to achieve the purpose of uniform drying. The dried material flows out from the discharge port. With the continuous rotation of the motor, the continuous entry of materials can realize mass production (Note: This machine is used in conjunction with a cooler. Since the temperature of the particles after drying is high, it is not conducive to storage and must be cooled before storage).