The working principle of the rotary coating machine is: the main motor drives the belt and pulley, which is transmitted to the driving shaft through the reducer, and the split gear installed on the driving shaft meshes with the large ring gear fixed on the body. Work towards each other. Materials are added from the feed end and pass through the inside of the cylinder. The air flow inside the cylinder is accelerated by the suction of the induced draft fan (used in conjunction with this machine).
Rotary coating machine uses and features:

The rotary coating machine is an organic fertilizer coating equipment in the entire organic fertilizer production line. It plays the role of material coating in the organic fertilizer production line. The complete set of equipment of the rotary coating machine consists of a screw conveyor, a mixing tank, an oil pump, a main engine, etc. It consists of a powder coating or liquid coating process. It can effectively prevent the agglomeration of compound fertilizers. The main unit is lined with polypropylene or acid-resistant stainless steel. This equipment has a special internal structure design based on process requirements and is an effective special equipment for compound fertilizer.

Structural overview of rotary coating machine:

1. Bracket part: The entire rotating part of the machine body is supported by the bracket and is subject to large forces. Therefore, the wheel frame part of this machine is welded with medium carbon steel plates and channel steel, and has passed strict quality control and special process requirements, and has achieved the purpose of this machine. In addition, the more important thing is the supporting wheel fixed on the frame. Considering that it will cause great friction with the rolling belt of the machine body, our factory specially chooses anti-corrosion and wear-resistant materials, which greatly improves the service life of the machine. The supporting wheel frame Casting integrated technology is also used. In addition, there are lifting hooks at the four corners of the wheel frame to facilitate loading, unloading and transportation.

2. Transmission part: The transmission part of the entire granulator is particularly important, and the work of the entire machine is based on this. The transmission frames are all welded from channel steel and have passed strict quality requirements. The main motor and reducer installed on the transmission frame are all selected products with reliable quality. The motor drives the pulley, V-belt, and reducer to the main shaft to make the machine body work. The transmission reducer and the working part of the main shaft use a nylon pin connector to engage and transmit the drive.
​